Search results

  1. U

    SOLD 6x Desire Power V8 LiPo Battery 6S 8300mah 35C-70C 22.2v + Peli case.

    ALL SOLD - For Sale, x6 Desire Power LiPo Battery 6S 8300mah 35C-70C 22.2v DP8300XP35-6S + Peli case. These were used on my drone, i have now sold the drone hence these are for sale. They are 6S 22.2v 8300mah Lipo battery's. Continuous discharge C rating of 35C (290.5 Amps) with a Burst...
  2. U

    SOLD Drone Sold - Droidworx / Aeronavics Skyjib X4 Ti-QR complete package RTF. ( UK )

    For sale I have my Droidworx X4 drone. Selling due to no time to use it with work and my other hobbies. The drone is to be sold as a complete package with transmitters, gimbal, battery's, charger and all spare parts. It is set up for 2 man operation one flying and one controlling the gimbal and...
  3. U

    DJI Ronin-M Gimbal + Spare Battery For Sale UK

    HI I have for sale DJI Ronin-M Gimbal + Spare 3400mah battery for sale, Both are boxed and have never been used, they have been taken out of the box and put back in, they were bought on the 18-jan-2016 for a project that is now not going to happen. A copy of the original receipt is...
  4. U

    Looking at using a Ronin-M on my heavylift, any interference issues ?

    That's great thanks for the reply's, give me great confidence now.
  5. U

    Looking at using a Ronin-M on my heavylift, any interference issues ?

    great, thanks for the reply.
  6. U

    Looking at using a Ronin-M on my heavylift, any interference issues ?

    Hi Im looking at using a Ronin-M on my heavy lift build, but my question is will the Ronin-M gimbal remote interfere with my remote on he Skyjib X4 ?. Im running a graupner MZ-24 to control the skyjib X4, if i put a ronin-M on it will the controller for the ronin-m cause communication problems...
  7. U

    T Motor MN 4014-11 330kv x8 All 8 for £ 250 + delivery

    They have approx 4 hours on them.
  8. U

    T Motor MN 4014-11 330kv x8 All 8 for £ 250 + delivery

    For sale I have 8x T motor MN 4014-11 330kv motors. 6 of them have short wires with 3.5mm connectors, 2 of them have longer wires with NO connectors (approx 550mm) This is because I was going to build a Hex but then decided upon a Octo. all come with the flat prop connectors. the 2 with...
  9. U

    Tattu 16000mah 6S 15/30C 22.2v lipo battery 3 Available

    SOLD
  10. U

    CopterX 20000mah 6S 30C 22.2v lipo battery CX-6S-20000-30C-1

    SOLD
  11. U

    CopterX 20000mah 6S 30C 22.2v lipo battery CX-6S-20000-30C-1

    Selling my CopterX 20000mah 22.2V 30C 6S CX-6S-20000-30C-1 lipo battery Has had 2 charges each at 1C rate, only charged before use. Always stored at the correct storage voltage. Equipped with AS150 & XT150 terminations. £ 200
  12. U

    Tattu 16000mah 6S 15/30C 22.2v lipo battery 3 Available

    Selling my Tattu 16000mah 22.2V 15/30C 6S lipo battery's. They have had approx 5 charges each at 1C rate, only charged before use. Always stored at the correct storage voltage. They come supplied with the original box. They are equipped with AS150 & XT150 terminations. £ 155 each or All 3...
  13. U

    Hi from UAValien in the UK.

    Its good but with the one battery its soon out of power, im thinking of changing the tarot frame and building it back into a X8 spinning 18" props if the calcs work out, not sure on frame i would choose, I use it for still photography hence the 5D2, dont do much video at all
  14. U

    Hi from UAValien in the UK.

    Hi, Thanks for the interest, Tarot X8 Wookong M with v2IMU DYS 40A v2 esc T Motor 4014-11 330kv motors Tarot tri-blade adaptors, with DJI 15 5.2 foldable props Zenmuse Z15 5D gimbal Canon 5Dmk2 with 24mm F2.8 IS lens Dji Can Bus Tarot retractable landing gear DJI avl58 transmitter with IBcrazy...
  15. U

    Hi from UAValien in the UK.

    Just saying Hi, to everyone on the forum. I originate and live in the UK, Building UAV to fly canon 5d and RED. So see you around. Mark
Top