Search results

Ferdinand, as the landing gear is part of the leg assembly is this frame limited to two axis gimbals only? Also how much additional slack did you need for the motor wires to ESC to accommodate the fold??

Did some basic balancing and then Powered up the board. Got some lights and viola, it's alive!! That's nice!! The tilt started slowly creeping forward but I'm used to the Skyline trying to rotate itself to death and quickly pulled the plug. Not perfect but a great start!! So now, working on...

Dan, can the camera tray board be relocated under the camera tray? If so does it still need to face up? Just started playing with the gimbal, getting everything balanced. The bottom of the tray has a bit of flex and could use another layer. So far the vertical tray adjustment system is well...

Thx Dan ;)

First Question - Schematic shows 2S to 4S ok. Just confirming that this doesn't need a BEC to drop it down to 5.5-6V

Ahh bloody hell, you pointed me in exactly the right direction Iscorama and I missed it. :black_eyed: As to the length of time on the burnt out servo??? Less than 25 flights. Happened very fast, principally due to nut tension but the fact that any dust can go straight into the needle bearings...

I think this is where to start: http://www.simplebgc.com/files/v10/connection_diagram.pdf http://www.simplebgc.com/files/v10/SimpleBGC_manual_1_2_eng.pdf http://www.simplebgc.com/files/XLoader.zip http://www.simplebgc.com/files/AvrdudeR.zip Please forward any additional information to...

Hi Musky, Could you also please send me the firmware you used and the loader. OK. Good news. Just received the gimbal. Will post impressions as I go along. First impression is that that there is nothing in the box but the gimbal and a clear plate. No mounting method of any kind. No...

Deep sigh... For those of you using AV200 w 360 Pan Kit. Be advised that the top nut (the big one) is WAYYYYYYYYYYYYYYYYYY to tight from the factory. This results in a burned up servo. DBL CHECK the model # of your burned up servo as if you believe information posted elsewhere (av200 repair...

OK one last off beat suggestion. Was playing around with a mix to get a Fail Safe switch AND IOC AND Adjustable Remote Gains... and when I did it incorrectly, throwing the IOC switch resulted in my gains increasing by 100 points or so. Suspect you've got a bad BAD Naza but check your remote for...

Coming to terms with the fact that 8" Graupners are no more... Any suggestions for similar alternatives??

Quick question: XT60 or XT90 on the connectors?? Nice and stable congrats.

Wondering if anybody has had any luck yet? Still no word on the Ecopter TBS Version....

Raport sumar: Numarul trimiterii CO992534578RO Denumire serviciu Colet postal extern Subunitate postala de expediere Oficiul Postal Bucuresti 3 Tara destinatie QUATAR Data expedierii 23.04.2013 Stare actuala In prelucrare - BSI Bucuresti Same status as before... Guess...

Picloc vs Radian vs Skyline? Have the Skyline and its been nothing but pain. Jitters at any gains approaching useable. Rubbish. Considering Radian but sounds like picloc may be a better combo

^ Yup! Frankly more interested in the BMC4K and whether the loss of DR range still puts it in RED/ARRI territory image wise. If the image holds, then no need to lift Scarlets. Heavy Lift just got a lot lighter.

Just a weird thing to check... Make sure your receiver is operating in Normal mode and not Hi-Speed. Have had some wild rides due to that...

Thats fantastic, do you have any closeups of how the frame fold-down works?? How much was the frame and would you buy it again?? Looks great!!

Looking good!

Wow Boris thats looking very good. love the adjustability!! Fingers and toes crossed your design works!! Nice dip in the pool btw ;)