Search results

I have the 14 x 4.7 apc on my folding quad / same motors without issue - other than stall point when its not flying a heavy load.. lots of lift for sure.. But specifically the xoar 13 x 6.5... wondering performance..

I'm running a Droidworks Ad8HL, with PH AV200 Gimbal- lifting Canon 76 / 5d3ect. - usually with 2 x 8000 mah 4s lipos. Been flying with the APC 12 x 3.8 props. Wondering if anyone has tested this motor with the xoar 13 x 6.5 , and what the results were? - Or any other suggestions that have...

Seems that in order to trigger a Canon 7d in ir remote mode it must be in timer mode- I guess I should have ordered the wired version only for shutter.. so no way to shoot any high-speed from what I have no found! I'll keep you informed on what I can learn! Thanks for the quick shipping! Jeff

Shutter Thank you again, i will let you know as soon as I get it here!

Thank you Thst would be outstanding! I use the 7d, and 5d3 currently on my octocopter! Thanks so much! I hope it works!

I do action sports photography.. Would love a faster trigger (5-7 fps) is this possible? To reprogram?

Canon eos [Just ordered a Canon trigger - realized reading through the photo trigger / video are split - Question for you.. If the Camera is on Photo Mode - and the trigger ( 3 way switch) is pushed and held... will the camera keep triggering at the max Burst rate, or only trigger one single...

steering / yaw speed? Anyone help me here... I'm trying to figure out how to slow down my steering/yaw on the YS-X6..A bit to fast and twitchy for my liking. I cant seen to figure out what/where the parameters are on the GCS. Anyone?

Interested in the whole package- can you tell me a price to canada V8B0L9 shipped/insured with FedEx?

anyone - have any tips on running 10" props without crazy flutter effects?

well, she seems to be flying now. Second issue arose. Same as on my 450 I'm unable to get the bird to fly with the standard 10" props. It "jumps" in hover, is super unstable and jjust wants to climb but very spuratic. I've tried loads of different gain settings based on the 450 google doc...

you bet - white was front. Spent all night trying to sort it out. TX seems to be sending all the right signals. Back to square one, I went through the esc's again to recalibrate "just in case" the first couple times didnt work.. Putting it back together here today. I think from my test fire...

naza placement. Motors as marked / wired 1-6 starting front right of naza front. All blades / rotations are correct RX - NAZA 1- A 2 - E 3 - T 4 - R 5 - U

screen grabs

ok photos asap.. YES, you bet all motors are placed / wired accordingly 1-6 placed counter clockwise starting front right at M1. I'll pop the top board again here and get some images.

Hi All. I'm lost. Setup the new 550, triple checked all the wiring. Every motor is firing the correct direction, props are correct as well. On startup all motors fire, and when I power up the hex wants to pickup and fly forwards. If I hold my joystick control in the 'reverse" most position...

settings and props So I spent some time again last night trying various settings in the gain control - from 100 across the board, working up using the google doc chart with everyones settings that were even close to mine... Same results. Tried the stock 8" gaui props, and some 9" as well -...

hit The "hit" was not that hard at all - only broke a prop, and didnt fall far. I cannot imagine that the FC itself is/was effected, but maybe I'll throw the old gaui brain in there just to be sure. I tried setting all back to 100 - Still no dice, very erratic jumpy flying.. wants to climb...

I have had the flamewheel quad and naza controller about a month now. It took a few broken props, and a set of motors to figure out the programming bit using my mac with windows parrallel. I'm currently running 10 x 4.5 props, the stock 10a gaui stock esc's, and some generic 960kv motors.It was...