Search results

We were hired to make a project to help built power lines. We had to draw a special line from one tower to another in the area where they would need the big helly. Video says all. Our 25kg lifter called Hammer X12 interceptor :), 3x Herkules III boards, 12x KW10 motors. We had 4x...

3.5 before you land is more than fine. you probably have wrong prope and 5s is killing you.

If you ask me you can get a heavy lifter with all the best off the best for that money with any company that makes RTF builds out off droidworx or cinestar. I will not say that we are the best but compare prices and you will see what i mean. Our cheapest RTF can do all those things what you said...

Graupner telemetry , while testing also normal current clamps :) FUll trotle and propelers upside down and you dont want to see the results.

HAHAHAHA, then dont watch this :)

why covert to 5s. dji is 6s and axi also. ???? with 2 big batts and red with some equ and fast climb it will go 200 amps easy, but that is like 25 amps per motor, not that much. top we did was 330. with them

joke asside i have not seen it in live so i cant comment. the same model they are selling for at least 1 year and i have not seen any footage from users also so maybe try some other forum. Btw what is the price nowdays.

Definitly 6s gensace 4x 5800 since you could draw 200 amps easy on 4kg payload. 5s would not be good for those axi. also option is 2x 10000 but again 100 amps per batt is not good.

This looks good, well made dampers and nice solution for existing owners with problems.

firts off all we are using hercules boards and not esc. well never taught off trying to run 2motors from 1 esc. will try it on desk.

Can you share them since i know sombody that hass flickering nonstop on nex5

as i recall 16 inch dont fit on skyjib. and best performance is with 17 inch props for this motors.

i know it can be done but you need some luck and some persuation to do it. There is one key that has the option in sliding inside. Or you need some spacers under motors, but then you need to cut some carbon to make it dubble thickness.

If only the propelers were bad i would be happy. Just too much going on with DJI and i hope they fix their support to dealers also cause we are swiming in dark a lot off times.

first off all alighn motor so they are not offset. just drill or remove the nuts with thread on one side and screw the engine holders with 4 screws. and be shure they are leveled. you dont need longer booms. makes no sence in going longer.

motors are not the same othervise wewould sell stock tigers. they have different spec since from our tests we have changed some spec and tiger did that for us. othervise they are similar but performance is not the same.

kopterworx.com does.

i think you have some chanels inverted. if you moove all stcks to down and left all sliders in software should go left. chech.

well we are still waiting for the pictures and the finished kopter video. or did this project die.

I dont see herkules board, So you have chosen esc.