Search results

I don't have a DJI F550 and I actually own the knock off version which I hand built from the ground up. I had no point of reference and the eCalc only seems to work for those who have an engineering degree or those who wrote the code as I can't get it to work for the life of me even with...

Hey, thanks for the info!! Clever idea to go wireless, good one. I finally got to use the tracker and it really worked great. I videoed the tracker from behind me while I was flying and that tracker was almost always dead on. The diversity is nice too, I bet required really, as when the antenna...

Ok so here's an update. I haven't posted the videos yet but I will soon. You can REALLY hear the difference too. I ended up going back to my 750Kv's because I like the torque over the speed or so it seems. I was able to hit 65mph across the field, which is about 640 feet long, in just a matter...

I think it was the context you used it in that threw me, you have "flats" inside the bore? The area is round and washers are flat and so are apartments in England, "flats". I've heard the word used but never for something that was round. :D My mind got confused, I have rounds in my squares and...

Bump!

Excellent site and welcome from America!

Welcome from America friend!! Great video, don't know much about gimbles because I don't use them I just own a few lol.. I like the raw camera footage of me flying versus a flying camera in record mode if you get my drift. Welcome and great video, thanks for sharing!

The ONLY bad thing about the goggles is YOU CANT MOVE. If you turn your head your brain expects to see the scenery around you to turn too and when it doesn't it throws off your equilibrium. I used to fly chin-to-chest with goggles on to remind me not to move. I LOVE goggles and I find it gives...

Ok so the obvious question, what motor DO people swap to? What are people most happy with? I"m on these 1350Kv's still..they are a BLAST!!! I have about 40% more power now but I'm going to switch to these flatter profile props and I'm willing to bet things will change drastically as far as...

What's a "flat"? Your car ran over a nail? :) Do you mean a washer? I have an 8mm to 4mm reducer I'd use for Graupners if I had any so those would work for these then too. What reaming tool do you use? Looks like I need to buy one. The flatter profile props will allow people to fly more precise...

I'm not sure I follow you? "They have "flats" inside the bore." What's a "flat"? To me that's what you get when your tire runs over a nail lol. I have a 8mm to 4mm spacer that I use on Graupners, is that what you're talking about or maybe "washer"? Anyway, I really like the fact that you can use...

I don't have DJI motors is what I'm saying so if they ARE NOTCHED then I will need to ream them, you probably have the DJI motors so you don't need to. I think DJI motors are 8mm if I remember right. I may buy a set just to see if can get them to work I guess. I use 4S and a lower profile blade...

Hey, just working on building my Eagle Tree Tracker and I THINK I have it working but want to confirm with those who know for sure and see if this behavior is expected. Ok so I've noticed a few things, first when the tracker loses "telemetry" it beeps for a while and then seems to return to...

4S or 3S? I'm hoping you say 4S as I've been thinking about going to a flatter profile propeller and these NEW DJI props seem to be the ish. I think they are also notched for DJI motors though right? Would we have to ream them out to get them to fit and what is the shaft size, 8mm? Thanks!

I'll give it another shot and when I do I'll post like you did. Maybe you can spot what I'm doing wrong.

Yeah, I'll be getting one...I'll use your name in the comments section when I do. :) I've always prefered the ZII over the others anyway. The bigger versions are cool but way too big for me to transport easily and 60" is hard enough. I'm sure the 60" is now slouch and the wing you have with the...

Thanks Bruce, I've used that thing a dozen times and it always says "no enough power to hover" no matter what I put in there. Even if I put the weight of my Multi at 0 it still says it won't fly and I'm using only built in options. Doesn't matter what I put in, even if I look it all up manually...

Hey, never saw this response sorry. I could make these 1350's work but they are probably over-the-top, going to fly them soon in the SAND PIT I test everything in that way if it hits the dirt at least it's soft They don't have 900's and the closest is 1000Kv 310W. Also keep in mind, I'm NOTTTTTT...

Dang it! I need to get one of those wings. That looks like the ZII, is that what that is? 60'? What motor/ESC you like on there? Also, what film or cover is that? I was looking at their website and they have a black one on there but I can't quite figure out exactly what it is, looks like canvas...

I can't use 12" because they wouldn't fit on my Hexa and 10" is the max so I'm basically at the point where I'm tuning the motors to the 10"x5 prop versus the other way around. I had NO data at all when I selected my motors, only basic math calculations. How do you know a 750kv is for a 12-13"...