Search results

Hello, Well i would go with xmr x4 kw9 motors or tiger eqivalent ones some good 40 amp esc, tiger ones if tigers are used. 15x5 or 16x5 inch tiger props. 6s setup Best option.

It will not work with naza V1. I dont think it will ever work. But on the side. THe usb is working on it.

Cris is not about the product, it is about what you can do :) It is the same as our precable line pulling for the power lines. It is totaly safe vith DJI MK and rest off them. Assembly and the rest is what it is important and know how and how to operate safely. BUt you alredy know the 99%...

+1 Usually it is all done in 3 min and while the dop and the rest decide on what to do you can change bateries for a next round. Flight times around 6 to 8 min are more than enough.

Hello I think that you did not do your homework. Well cx v2, v3 and c600 are 99% the same. Except some fancy stuff. XM x4- beautifull bird and avalibe in at least 3 stores in europe. Check droidworx suplier page and you will see. I wote for XM sicnce cx is too small and not worth the money. We...

This all are talk and nobody for now has even 1 gimball to show on the kopter that can carry 5d with stable performace and no roll drift. Here is where alexmoss boards and other stuff fails until they fix it and add some axelerometers and some stuff. FOr handhealdit is ok but on the kopter all...

Probably he did not even see it fly. He baught a few now since they are on special price and has to sell them, that is why he is spaming forus as we type this. I hope there will be no vibration issues and unhappy customers.

Picture sais it all.

It would be good if you had red bracket for top screews. Also please test a lot before you start to fly it. And center it othervise you will burn servo in 10 sec.

Send it to me also dejan@kopterworx.com Is there any new software also. Since i have truble updating to new firmware on some models.

Hello, We can do it in Italy and Swiss also. Send us and email to dejan@aerial.kopterworx.com and we will share all info and details.

+1 Bart +1 IrisAerial DJI stock x8 mixer uses same propelers . But you can have different ones(the same as mikrokopter) since DJI also has a custom mixer. I do not suggest it until you are an expert.

Well i did not recive any emails. Let me check with krleas to see where is your email. Please can you send one more copy off email on info@kopterworx.com and dejan@kopterworx.com just to be shure.

This is totaly normal iff using stock dji mixer with same props. Motors should be good unless you overheat them with like 90 deg celsius for longer perioud. Please dont try different picth on stock mixer since you will get a uncontrolable spin off . I dont know who sugested this but this is not...

I dont know what UK taxes and customs are but i can say that we pay 20% taxes and 7.5% customs almost always. Plus the downside off shiping and waiting and all. I even got some clients that say that it was more expensive at the end than if they baught it in our shop.

Maximum we have done with small quad was or was it x8 was 106 kmh. We had gps module with tracking memory on it. Was fun and i think it could be even faster.

Then the next thing that they will release will make even more ppl angry. They realy know how to make dealers and customers angry. But we try to resolve all the stuff with customers so we are all happy. This is the only way to make it and somethimes we cant do miracules. Even we dont know what...

We just got the NAZA veersion 2 on stock so preorders go out today. http://www.kopterworx.com/vmchk/New-products-in-May/Naza-V2-+-GPS-on-stock

Well the motor is overspining in video. And you can also hear this in our video. Hard to say what went on. Sorry for your loss.

First off all. Are all esc calibrated. DID you check iff you change the motor 1 to esc 2 and esc 2 to motor 1 what hapenes. Let us know more.