Woookong M V2 X8 and no control but throttle - VIDEO

hifidiaries

Member
I'm lost....
4 flights and no control but Throttle. Whats up? Weights in the video have kept it from exploding everytime it crashes.

X8 configuration
Flew with A2 fine for a year (minus loosing altitude issue, thus the change in FC)
AUW 25lbs
See pics for Gains etc.


Videos here:
https://www.dropbox.com/sh/vf3izlor0...GZ-d-l8ta?dl=0

More explanation:
This X8 ship I built a year ago for HL work, and I had A2 installed. It flew fine, with my custom Motor mix, except It would randomly decide to stop holding altitude and drop unless I added throttle. But then it would raise etc. I dealt with that, and would adjust live.
Then someone told me to try the V2 wookong setup for a HL. So I did. I got the Wookong with the new V2 imu. So far it will NOT respond to any commands once airborne, except for throttle.

That being said, ON the ground, and with no blades, It will respond fine. all motors respond correctly ,and follow my movements through all aspects: alt, pitch, roll, elev...

We tried the gains low like 150, we tried them high like 250, NO change.

What could be up? At first I thought it was Gains, they needed to be cranked. They seemed to act super sloppy, and as you can see, it even seems like CG is way off, or gains are super low. But they aren't. The fact that it will NOT respond to any input except throttle is the key I think here. Please pitch in. And thanks.

CJ
Cell: 435-232-3633
 

Attachments

  • 2015-06-03 18.41.25.png
    2015-06-03 18.41.25.png
    167.1 KB · Views: 236
  • 2015-06-03 18.38.51.png
    2015-06-03 18.38.51.png
    153.8 KB · Views: 369
  • 2015-06-03 18.39.14.jpg
    2015-06-03 18.39.14.jpg
    99.3 KB · Views: 369

soler

Member
Do you have the fence option turned on, the one that only allows it to go 100m etc from the launch position?
 

Top