Recent content by tiggybengal

quanum 4 at once Just thought i would add why i need 4 at once on my x8 i use 4 lipo's connected to a droidworx power distribution board all soldered individually to the board but some flights result in a one lipo giving a used % a lot lower than the others so this could be disastrous if i...

using 4 Quanum 2.4GHz Telemetry System at once on same rig i bought 4 of these last week and hooking them all up to one quad x8 with 4 lip's only one works so they must all be on the same frequency am asking hobby king how to get them working all at same time if anyone has solved this i would...

Will anybody EVER answer this question Please Please Please e-calc motor DJI Motor 2212 920kv WHAT SETINGS DO YOU ENTER considering that probably more of these motors have been sold than any other motor in the world getting the numbers for e-calc would be easy instead it is easier to find...

H3d2 naza tilt wiring Hi do do you have a diagram of h3d2 to naza then naza to dx8 then setting up dx8 to control tilt you have helped me in the past with very good wiring diagrams/explanations hope you can again please thanks

are you serious answering this like you did it was most unhelpful the bloke wants to make the camera look down as he wants nothing to do with roll and tilt adjustment

did you find out how to do it? i want to setup my alexmos board to be connected to my receiver to control the tilt so i can make the camera look down as i please

iPad ground station Hi Tahoe Ed thanks for your reply I have a non bluetooth ground station i use on a toughbook cf29 how do i use the bluetooth version on a toughbook cos it aint got bluetooth please also do you think the original ground station is the same or equal to the bluetooth version...

GS app won't connect [The new GS app is now available and is optimized for iOS7. Those that were having issues should now be able to connect hi Tahoed mine is a brand new iPad air latest software worked ok until i updated datalink/ground station firmware now cannot get it to connect to iPad...

Hi Kloner It is this one in the picture http://quadcopters.co.uk/fpv-camera-700tv-lines-pal-ccd-sony-had-ccd-ii-----quadcopters-uk-640-p.asp but it is also the same with my go pro and my nex 5 all wired according to dji instructions as illustrated in the pic yes i have tried without the iOSD...

Hi Maverick Do you think my wiring is correct because i only get iOSD display no video from camera have ordered another iOSD MKII to see if that works with this wiring

thanks for that i have also managed to get unsqashed video now but cant get rid of the menu buttons displaying on the right side of screen am going with a 700 line Sony HAD attached to the underneath of gimbal the nex is attached to then use nex 5 with a 2 way av switcher just to make sure...

we aint all rich or posers (even though my collection of computers include them) different tools for different jobs etc. Macs crash just as often as pc's and are just as unreliable but the posers try and tell you different MONEY no object like PRETTY looking computer get a MAC aint well of...

re:- gps tracker t102 £20-£30 quid on ebay or amazon i have a vodaphone payg sim in mine could not get the others i tried to work you could also go the SUPERIOR immersionrc.com EzOsd route http://www.immersionrc.com/products.php telemetry and tracking --> iTelemetry app for iphone/android...

I think you will end up with the same board as below all mine work perfectly with my 600mw tx i did need to take the 5+ volt (red wire ) from my 600mw tx and the ground ( black wire ) in the 5 wire video cable and solder to all the boards to stop them from blue sceening after a few seconds with...

hi i have my nex 5 and mini hdmi2av white box converter (powered from 600mw tx) working fine and connected to my iOSD MKii also working fine connected to my ImmersionRC 5.8GHz Long Range 600mW Transmitter However even though the picture quality is fine the actual picture appears squashed like...