Recent content by rceeguy

Got a tech online and he helped me find the issue. I needed to use a magnet on the GPS to bring the MOD (modulation?) down from 5700, to a range of 1500 - 2500. Finally got it to calibrate. All is good!

Got it working It would not calibrate. But, got a tech online and he helped me find the issue. I needed to use a magnet on the GPS to bring the MOD (modulation?) down from 5700, to a range of 1500 - 2500. Finally got it to calibrate, and then was able to set the switch for IOC.

Yes, it is pointed to the front of the 550, as is the MC. Pointed to the RED arms.

I can't seem to get my switch setting for Home/Course lock to work. I have a DX8, NAZA V2, Orange 7 channel RX from HobbyKing. Using channel 6, Flap/Aux1 in RX, connected to MC X1. The X1 line in Basic>RC page moves when I flip the switch.......but, when on the page showing the bar with the 3...

My FW550 with NAZA V2 w/GPS will NOT calibrate. I can get the green LED on the horizontal calibrate, but I cannot get it to calibrate on the nose down vertical calibrate. I get the red/yellow flashing LED. I tried to calibrate with the NAZA Assistant in both the Basic and Advanced...

My MC is V4. I tried to calibrate but it fails when I turn the craft with the nose down. I tried basic and advanced calibration with no success. I just get the flashing red/yellow led.

I have tried that adjustment.....does not move the pointer. In fact, all 3 modes stay black in color on the IOC page. In switch settings on DX8, Flap:Aux1 is how it is set. Interestingly, when I am in Switch setting on the DX8, I noticed that the 3 modes turn blue in color on the IOC page...

I have just completed my FW550, and am programming it. I have two issues: First is I can't get the IOC to recognize my 3 position Flap/Aux1 switch. I have it connected to X2 on the MC, as indicated in the instructions, but it will not move through the 3 modes when I flip the switch. However, I...