you might want to try to change the can-bus cable set up. ive got my Z5DIII can-bus hooked to the compass can-bus port. apperently it makes a difference where you plug in the gimbal, even DJI says nothing about it.
looks weird but ive seen a few videos where people fly that way. you will need the thin motor mounting disks who come with the t motor props. they fit to the 4114 motor!
ive tried the t motor 15x5 on the 4114 motor and it worked! youre supposed to fix the t motor props like switched 90 degrees to the fixing arms of the folding props...
Hey guys,
my sky jib 6 has issues turning in the two different yaw directions.
when i turn right, its all "normal", when i turn left, it goes extremely slow!
in the meantime i have a different wookong controller and different esc (herkules III ) on board. all motors are straight vertical. tx...
this looks like the same thing happend to my skyjib6 / wookong-m the oter day. WHAT IS THAT BEHAVIOUR OUT OF THE BLUE?!?!
first i thought it might be a vortex ring problem. but the second time it appeared while hovering. i cant really figure out what it is but im tipping on bad/wrong esc´s. or...
i dont have magic latern on mine, though they say that in some cases it messes up your internal camera software.
i usually connect the gimbal before i boot up the whole system. you might want to try this.
yeah i did that. checked the pots. but the bad thing is that i couldnt get my way to the pan motor pot. somehow you can not open that part of the gimbal even when you unscrew all screws! there are 2 screws they are kind of hidden. so you can not reach them with any screwdriver. weird!
when i connect the gcu to the assistant software, it wont recognise me as a registered user. and i cant login! it still regognises the current version of the gcu though.
i went down too fast so the copter got into a vortex ring. didnt expected it would effect the drone THAT much!
so it wasnt an electronic problem. my gcu is placed on a "safe" spot on the copter, so i figure it couldnt get any hit from the crash.
Zenmuse 5d error
Hey guys.
something else real quick...
i had a crash with my skyjib 6 the other day. since then, my zenmuse 5d mark III wont work right anymore. when i turn it on, it starts spinning around the horizontal level very quickly. there is no obvious damage on the gimbal. i...
yeah bummer i just noticed that the GCU won't work with a 3s. you're totally right with the can bus hassle and the extra dealing with a 2nd battery. though the leds won't work with my 2x6s 8000mAh lipos. ill just do the leds with a bec and all the other stuff with the main batteries.
last...
Hi Joepapa and all of you guys.
Ive got a Z5D the other day and now I'm not quite sure if i should run it on the motor lipos or if i should run it on an extra battery. if you do run it on a separate battery do you think a 3s 2600mAh should make it for a few 10min flights? if separately, i would...