Recent content by cfrea

  1. C

    IMU Positioning

    There is a very simply fix. Don't use that green cushion or whatever it is you're using. Just use a thin piece of 3M VHB which is what the IMU is designed to work with. DJI actually advises not use any form of cushion as the IMU already is designed to account for the vibrations. I wouldn't...
  2. C

    Brand new PULSE LIPO Battery 6600mAh 14.8V 35C Flat pack

    These are Pulse 6600 mah flat packs. Production date is July 2013 so they are guaranteed fresh! Power leads are soldered with authentic high quality XT-60 connectors. Just plug and play into your heli/quadcopter. Perfect for the DJI F550 or any other multirotor! It keeps the CG low compared to...
  3. C

    New MaxAmps Battery Damaged or Not?

    If the battery starts getting warm immediately take it outside. Get a voltage checker to check all the cells. Then take it outside and try charging it. It should be fine. Just be careful with that pack though for the rest of its life.
  4. C

    S800 EVO prop install and stress bench test video

    Yeah that is red which is basically very hard to remove . i suggest heating it up and replacing with blue before it fully dries and sets
  5. C

    S800 EVO prop install and stress bench test video

    I know DJI uses the Red threadlocker by standard, but I would avoid them. It is nearly impossible to remove them. You are almost sure to strip the screws trying to remove them.
  6. C

    New EVO on the bench, observations

    Hi Louis, I'm referring to Page 17, are those knobs very hard to turn for you?
  7. C

    New EVO on the bench, observations

    Thanks Louis what page in the manual do you see this ?
  8. C

    New EVO on the bench, observations

    :livid: Dam DJI I can't believe the revised the EVO with different units. I sure would be upset if I just bought one but got one with the older shims. Maybe you should contact DJI and explain you want the updated ones that have absorbers
  9. C

    New EVO on the bench, observations

    I'm doing that but still have difficulty tightening some :(
  10. C

    FS: (3) New Original DJI S800 Battery Tray Battery Plate Sets

    Still for sale?
  11. C

    New EVO on the bench, observations

    Hey I meant the other piece that you spin to lock the arms in place
  12. C

    New EVO on the bench, observations

    Completely normal I noticed that on mine and freaked out. Then realized its like that on purpose. By the way, is it very difficult to lock the airframe onto the landing gears? When I try to spin the 6 tabs to hold the arms in place it requires so much force!
  13. C

    Confused on S-Bus and Naza-M V2 and using additional channels.

    First here is my setup I am having built: DJI F550 Zenmuse H3-2D (also utilize tilt) Naza-M V2 iOSD Mini DJI 5.8GHZ Futaba T8FG w/ supplied receiver. I know traditionally you would just connect the outputs from the receiver into the Naza-M, and use 7 channels, leaving an 8th channel free. My...
See more
Top