Only 3 green blinking lights instead of 4 after startup.

B

Bearclaw

New Member
The hexacopter flies great but in the manual where it shows all the led codes, it states that if you don't get 4 green lights after startup that you should contact dji. Just wondering what this is about as I only get 3 green lights after the normal startup sequence.

"Do NOT move any command sticks during this procedure! Please contact us if the last four green blinks are abnormal."
 

A

Arcolog2

Member
Hey I was wondering if you have contacted DJI or not about the 3 green flashes? I have not been able to call support yet, but I have the same issue. I thought I saw on another forum someone post that the 3 flashes is ok and it will be back to 4 flashes in an upcoming firmware update. I'd like to know though since I have the same "issue".
 

B

Bearclaw

New Member
Yes, emailed DJI, and received an email back in about an hour.

From DJI "3 green is also fine. We will fix it in next firmware."

DJI reccomended using the 8" props, but I really want the flight time, and lifting capacity, so I used APC 10x4.3 and all my problems went away. F550 flies great now. No worries about the motor heat, flying from 5280 to 11,000 feet here in Colorado, the thinner air is easier on the motors.
 

You must log in or register to reply here.
Top