Fs: Flexacopter, wkm, ph av130, skyline 1.2 -- complete, rtf, ap ready tons of extras

[PondMedic]

NO LONGER FOR SALE as of 9.11.12 - I've flown several other hexa's and octa's in the last few days thinking I was in the market for a different backup. No way - after flying the others, my FlexaCopter is staying with me. Once I had a chance to compare it, I realized how good it really is!

I'm selling one of my two backup AP Hexacopters. This thing is turn-key, ready to fly for fun or AP work. I've been using it for professional AP work for the last 6 weeks with great success. This setup is as complete and reliable as they come. Better than purchasing a new professional AP rig for $14,000+

Skivvie built it in May 2012 and I purchased it from Sid3ways about 6 weeks ago. Since purchasing it, I've improved it dramatically and made it a true turn-key AP rig. I just don't need two backup rigs anymore, so this one's gotta go to a good home.

Skivvie's complete build thread can be seen here. It's the meat and potatoes of the copter. I can attest that the build is solid - I've had nothing but awesome performance from the hexacopter. Not one shortcut was made and it's noticed when you fly it.

Here's a breakdown of features and what's included in the price:

Aurora 9 TX with Optima 9 RX (battery telemetry shown on radio)
FPV Downlink Monitor/Transmitter Tray Combo -- Details here
Flexacopter Frame with goose arm, DJI mount plate for center hub
Voltair PDB
16x ZIPPY Flightmax 5000mAh 4S 25C LiPo (used in parallel on copter) - 10 of the 16 batteries are brand new and have zero flight time
DJI Wookong M (WK-M) Flight Controller
6x Avroto 2814-11s Short Shaft Motors
6x Maytech 35A OPTO V1 ESCs
PhotoHigher AV-130 Camera Gimbal
PhotoHigher Skyline RSGS gimbal control -- 1.2 firmware and dummy pots installed and calibrated -- no jitters, truly "rock solid"
Castle Creations CC-BEC RX set to 6.5v
1 LED Strips in Red
2 LED Strips in Orange
Reducers 8mm-6mm for E-Prop
6 Graupner E-Props 11x5 (3L and 3R) -- 8 extra props (4L and 4R)
4x #AM1001A/68 PolyMax 3.5mm Gold Connectors 10 PAIRS (20PC)
HDV-M610 MINI HDMI to CVBS/L+R Audio Converter Adapter
Stratosnapper remote shutter trigger - calibrated for use with Sony NEX at the moment
RC Shutter - camera/video remote operated shutter control
HyperThin HDMI cable Mini (0.8m Black)
Immersion RC 5.8GHz 600mw Video TX
Immersion RC 5.8GHz Uno Receiver
Clover leaf TX and RX Video downlink antennas
1x ZIPPY Flightmax 1000mAh 3S1P 15C for Video TX
2x NiMH batteries to power the Skyline RSGS and Stratosnapper
2x 2c 4100 LiPo's to power the video downlink reciever and 7" monitor
All flight batteries and connections are EC5

ALL OF THE ABOVE PRICED AT $8,800 OBO - includes expedited shipping to anywhere in the the lower 48 states
Payment: registered money order, cashiers check, PayPal (add 2.9% PayPal fees)

Shipping: expedited shipping anywhere in the lower 48 states. Same day shipping if you use PayPal.

EXTRAS FOR SALE IF YOU WANT THEM

Revolectrix CellPro PowerLab 6
1x MPA adapter
7x EC5/Dean's adapters
1x Battery terminal clamp adapters
1x Travel Bag
$300/each if purchased separate from the Flexacopter
$285/each - if purchased with the Flexacopter
2 complete sets available

Sony NEX 7 Camera Kit
18-55mm lens
All original items - box, manuals, battery, charger, etc.
$1350 if purchased separate from the Flexacopter
$1275 if purchased with the Flexacopter

View attachment 6145View attachment 6146View attachment 6147View attachment 6148View attachment 6149View attachment 6150View attachment 6151View attachment 6152View attachment 6153View attachment 6154View attachment 6155View attachment 6156View attachment 6157View attachment 6158View attachment 6159View attachment 6160View attachment 6161View attachment 6162View attachment 6163View attachment 6164View attachment 6165

Photo note: you will count only 14 of the 4S LiPo's - I missed the fact that two were still on the charger when I took the photos. Also, the 2S 1000mA Zippy and one of the NiMH batteries are installed on the copter when the photos were taken in case you were looking for them on the table.

You can PM me, e-mail me at trent@pondmedics (dot) com or call me at 214.402.42nine7

I will respond quickly to questions, inquirys or offers. Once you purchase it from me, I'd be happy to promptly support you over the phone and e-mail if you have any questions.

 

[PondMedic]

Let's sweeten this deal a bit. I'm willing to pay the 2.9% PayPal fee if you use PayPal. Otherwise, cashiers check and registered money order buyers will receive a $255 discount. Contact me with any questions.

 

[Sid3ways]

I'll say one thing, it is truly amazing that this copter has changed hands this frequently because it is one of the best builds you'll ever see. I still regret letting go of it as it was 110% reliable and the position hold was less than a foot, much tighter than I can get my S800.

Trent, I think I might take 1 of those charger setups though, they are top notch.

 

[PondMedic]

Sid3ways - I agree - it's a great setup, indeed, even in 15 mph winds. If no one wants it, I won't be disappointed to hold on to it. I'm just hoping to free up some funds for other parts of the business by selling it. PM me on the CellPro 6 and we'll get that deal done. Thanks!

 

[Emowillcox]

Hi Trent I see your up near the Dallas area doing ap work. Any chance you have done work on a show called Gas Monkey?

 

[Sid3ways]

Sent you an email on the chargers Trent. I'll still take one if you want to unload it. Glad to see you are keeping the Flexa, it flies like none other.