COMPLETE XA HEXA with DJI WKM Wookong and XA gimbal + spares
I built this Hexa to fly around my GoPro camera, but I am moving up to a larger heli, so It is not needed. It has had very little use, and is perfect condition. It flies for a little over 10-12 minutes with two packs. It can also just run one pack.
The details - It is an XAircraft CF Hexa frame with AKE QuadDancer QD1100B motors. Turnigy 30amp Plush ESCs. Expertly soldered power distribution bus, with silicone wire, extra power points for lights, etc. Forward blue LED panel is mounted above gimbal to assist in orientation. Similar amber led in rear. SOLD WITHOUT RX.
http://www.cnchelicopter.com/servlet/the-2122/Xaircraft-Hexa-Frame-carbon/Detail
DJI WooKong gps system. with box and key codes.
10A Castle Creations BEC to power camera gimbal servos.
Camera Gimbal is XAircrafts design. Very nice thick carbon fiber and silicone dampers. Includes the GOPRO frame, but NOT THE CAMERA.
http://www.cnchelicopter.com/servlet/the-2012/Xaircraft-x650-CMGOPRO-dsh-TP-two/Detail
Includes spare parts. a handful of spare props and spare bits.
I also built a larger and stronger battery rack that uses three factory legs and an aluminum battery bracket. Batteries included are two Turnigy Nanotech 3S 5200mah packs.
Any questions just ask - its an excellent aerial photography rig for small cameras or gopros and I can answer any question you have..
$1600 for everything + Shipping
Also - here is a youtube video I took with this hexa- http://www.youtube.com/watch?v=X31CFADwP30
I built this Hexa to fly around my GoPro camera, but I am moving up to a larger heli, so It is not needed. It has had very little use, and is perfect condition. It flies for a little over 10-12 minutes with two packs. It can also just run one pack.
The details - It is an XAircraft CF Hexa frame with AKE QuadDancer QD1100B motors. Turnigy 30amp Plush ESCs. Expertly soldered power distribution bus, with silicone wire, extra power points for lights, etc. Forward blue LED panel is mounted above gimbal to assist in orientation. Similar amber led in rear. SOLD WITHOUT RX.
http://www.cnchelicopter.com/servlet/the-2122/Xaircraft-Hexa-Frame-carbon/Detail
DJI WooKong gps system. with box and key codes.
10A Castle Creations BEC to power camera gimbal servos.
Camera Gimbal is XAircrafts design. Very nice thick carbon fiber and silicone dampers. Includes the GOPRO frame, but NOT THE CAMERA.
http://www.cnchelicopter.com/servlet/the-2012/Xaircraft-x650-CMGOPRO-dsh-TP-two/Detail
Includes spare parts. a handful of spare props and spare bits.
I also built a larger and stronger battery rack that uses three factory legs and an aluminum battery bracket. Batteries included are two Turnigy Nanotech 3S 5200mah packs.
Any questions just ask - its an excellent aerial photography rig for small cameras or gopros and I can answer any question you have..
$1600 for everything + Shipping
Also - here is a youtube video I took with this hexa- http://www.youtube.com/watch?v=X31CFADwP30
Attachments
Last edited by a moderator: