Mikrokopter servos an external potentiometer

[Roberto]

hello again.

I am using a savox 1258 on tilt axis with an external potentiometer.

I am running it with a bec getting 6v.

When i move the servo from my redio its move fast, realy fast, but connecting it to the FC, the servo became slower.

I am usin an 4k7 external POT.

Can I make something to move the servo as fast as using the radio?
It is there any different if I use a 10K pot instead de 4,7k?

Thank you again

Roberto

 

[Bartman]

ROberto,
The correct pot for the Savox servo is a 5k pot like this one

http://www.mouser.com/ProductDetail...=sGAEpiMZZMuarXojuOTsc7XUj8Kk/1Tsn0eH4I1KaxQ=

you'll have to check the specs to find one that physically fits in your mount

 

[Bartman]

hello again.

I am using a savox 1258 on tilt axis with an external potentiometer.

I am running it with a bec getting 6v.

When i move the servo from my redio its move fast, realy fast, but connecting it to the FC, the servo became slower.

I am usin an 4k7 external POT.

Can I make something to move the servo as fast as using the radio?
It is there any different if I use a 10K pot instead de 4,7k?

Thank you again

Roberto

the servo may be slow because the pot is close to where it needs to be for the commanded position. does the servo speed up as the pot position is changed?

 

[Roberto]

Thank you about the link.
I bought the POT like 5K as they told me it was the same more or less.

Yes, as you said, the servo looks to be faster as far it is from the commanded position.