djw43
Member
I am switching from Futaba 7C (no F/S) to 14SG on SYSTEM "14 channel FASSTest" using R7008SB in sbus 1 (ch8)
I'm trying to throttle calibrate for this new Tx and Rx.
I am powering the Rx to CH7, since the ESC are non BEC (maytech OPTO 45A).
I have tried signaling the ESC with Rx CH3 and with the SBUS(CH8) but I am not getting any response, no chimes.
In order, powering Tx, then powering Rx then powering ESC.
Any help appreciated,
thanks
I'm trying to throttle calibrate for this new Tx and Rx.
I am powering the Rx to CH7, since the ESC are non BEC (maytech OPTO 45A).
I have tried signaling the ESC with Rx CH3 and with the SBUS(CH8) but I am not getting any response, no chimes.
In order, powering Tx, then powering Rx then powering ESC.
Any help appreciated,
thanks