Emowillcox
Member
Normally I run 4S but after talking to Bart and Sleepy C thought i'd try to use some my 6S packs that I used on my old helicopters on the multicopters. Hooked up some new Turnigy Multistar ESC and Motors that can run 6S on a quad with a Naza FC so I could try 6S. This morning took it out put 4S on and it flew fine. So then went for my big test with 6S. Hooked up the battery stepped back and armed the motors with the transmitter and the Idle RPM once I armed the motors on 6 S was so fast that the quad took off and started flying. No need for coffee after this woke me up:shame:
:dejection::livid::dread::black_eyed:. Question is how can I lower the arming speed on the motors once I arm the NAZA with the radio. I am using a JR 9503. Thought maybe I could do it through the radio adjustments, but didn't have much luck. Wondering if I need to calibrate the ESCs to the radio or something. On 4S its no problem, but the extra power from the 6S is too much.
:dejection::livid::dread::black_eyed:. Question is how can I lower the arming speed on the motors once I arm the NAZA with the radio. I am using a JR 9503. Thought maybe I could do it through the radio adjustments, but didn't have much luck. Wondering if I need to calibrate the ESCs to the radio or something. On 4S its no problem, but the extra power from the 6S is too much.
