[h=3]Up for sale is a 2 month old (in mint condition) Aericam X6 platform, with a 3 axis Gimbal. I am selling this setup to fund my next Aerial Photography project.
Included:
Bind and Fly X6 platform:
(6) Hacker A50-14S V2.1 motors.
(6) Hobby Wing 60A ESC’s (optimized 400Hz frequency for DJI flight controller).
(1) DJI NAZA flight controller with GPS antenna.
(1) Futaba FASST 14ch RX.
(6) JXF 16X6 props (mounted) and (6) 16X6 JXF props as backup.
(1) Extra X6 Airframe
(1) Set of Prop Guards.
-All the power distribution system(s) and LED light drivers are included.
Gimbal:
(1)Futaba 8ch High Voltage S.Bus RX
(3)Hitec HS-7940 High Voltage Gimbal Servos
(1)600mw 5.8Ghz downling transmitter
(1)On Screen Display and GPS antenna that will monitor altitude,
distance from takeoff point, and battery life.
(1)Remote On/Off for downlink.
(1)Remote Start Stop for camera (I use it with the Red Epic/Cannon 5D
Mark III/Panasonic GH2).
(1)HDMI to composite converter.
(3)Independent power regulators to run the Gimbal/Camera/Focus Iris Zoom motors.
Please note, NO batteries, Gimbal Controller(s), Cameras, Lenses, camera cables, Focus Iris Zoom motors, or flight control transmitter(s) are included in this listing. I use (2) MaxAmps 6S 11000mAh flight packs and (1) 4S 5000mAh Gimbal pack.
Features to note: The last shot shows the bottom of the Multirotor and the quick release mechanism to dismount from Gimbal (takes 1 min to do). The arms of the Multirotor fold for quick transport (2 min process). For shipping the Multirotor arms come off and the entire platform takes down in about 10 min.-I am not looking for any trades, asking $7500 for the setup. Please feel free to PM me with any serious questions regarding the setup. Low ball offers will be ignored.
-I will cover shipping if the system sells for my asking price in the USA ONLY.
Please check out my RunRyder post/account if you need to see "feedback". This is a legit sale:[/h]http://rc.runryder.com/helicopter/t745702p1/
Included:
Bind and Fly X6 platform:
(6) Hacker A50-14S V2.1 motors.
(6) Hobby Wing 60A ESC’s (optimized 400Hz frequency for DJI flight controller).
(1) DJI NAZA flight controller with GPS antenna.
(1) Futaba FASST 14ch RX.
(6) JXF 16X6 props (mounted) and (6) 16X6 JXF props as backup.
(1) Extra X6 Airframe
(1) Set of Prop Guards.
-All the power distribution system(s) and LED light drivers are included.
Gimbal:
(1)Futaba 8ch High Voltage S.Bus RX
(3)Hitec HS-7940 High Voltage Gimbal Servos
(1)600mw 5.8Ghz downling transmitter
(1)On Screen Display and GPS antenna that will monitor altitude,
distance from takeoff point, and battery life.
(1)Remote On/Off for downlink.
(1)Remote Start Stop for camera (I use it with the Red Epic/Cannon 5D
Mark III/Panasonic GH2).
(1)HDMI to composite converter.
(3)Independent power regulators to run the Gimbal/Camera/Focus Iris Zoom motors.
Please note, NO batteries, Gimbal Controller(s), Cameras, Lenses, camera cables, Focus Iris Zoom motors, or flight control transmitter(s) are included in this listing. I use (2) MaxAmps 6S 11000mAh flight packs and (1) 4S 5000mAh Gimbal pack.
Features to note: The last shot shows the bottom of the Multirotor and the quick release mechanism to dismount from Gimbal (takes 1 min to do). The arms of the Multirotor fold for quick transport (2 min process). For shipping the Multirotor arms come off and the entire platform takes down in about 10 min.-I am not looking for any trades, asking $7500 for the setup. Please feel free to PM me with any serious questions regarding the setup. Low ball offers will be ignored.
-I will cover shipping if the system sells for my asking price in the USA ONLY.
Please check out my RunRyder post/account if you need to see "feedback". This is a legit sale:[/h]http://rc.runryder.com/helicopter/t745702p1/
